Copyright 2018 - designed by Nasim Ravi

Uluslararası Dergilerde Yayınlanan Makaleler

Kirmacioglu, K.E., Kaynak, Y., Benafan, O. (2018) Machinability of Ni-Rich NiTiHf High Temperature Shape Memory Alloy, Submitted to "Smart Materials & Structures", Under review.

Kaynak, Y., Tascioglu, E. (2018) Surface improvement of Selective Laser Melted Inconel 718 Alloy through surface finishing operations, Submitted to "Progress in Additive Manufacturing", Under review.

Kaynak, Y., Kitay, O. ( 2018) The effect of post processing operations on surface characteristics of 316L stainless steel produced by selective laser melting, Submitted to "Additive Manufacturing", Under Review.

Tascioglu, E., Gharibi, A., Kaynak, Y. (2018) High speed machining of near beta titanium Ti-5553 alloy under various cooling and lubrication conditions, Submitted to "Int. Journal of Advanced Manufacturing Technology", Under review.

Duman, E., Kaynak, Y., Dirikolu, H., (2018) The Effects of Liquid Nitrogen and Carbon Dioxide Cryogenic Coolants on Machining Induced Surface Integrity of Ti-6Al-4V Alloy, Submitted to Journal, Under review. 

 

Kaynak, Y. Gharibi A. Yılmaz, Ü., Köklü, U., Aslantaş, K. (2018) A comparison of flood cooling, minimum quantity lubrication and high pressure coolant on machining and surface integrity of titanium Ti-5553 alloy , Journal of Manufacturing Processes, 34, pp.503-512.

Aslantaş, K., Kaynak, Y. (2018) Şekil Hafızalı NİTİ Alaşımının Mikro Frezelenmesi ve Kritik Talaş Kalınlığının Belirlenmesi, Submitted to Journal of the Faculty of Engineering and Architecture of Gazi University, Accepted, in press.

Kaynak, Y., Tascioglu, E. ( 2018) Finish machining-induced surface roughness, microhardness and XRD analysis of selective laser melted Inconel 718 alloy, Procedia CIRP, 71, pp.500-504. https://doi.org/10.1016/j.procir.2018.05.013

Kaynak, Y., Kıtay, Ö. (2018) Porosity, Surface Quality, Microhardness and Microstructure of Selective Laser Melted 316L Stainless Steel Resulting from Finish Machining, Journal of Manufacturing and Materials Processing,2(2), 36, P.1-12.  https://doi.org/10.3390/jmmp2020036

Kaynak, Y. Gharibi, A.,(2018)  Progressive Tool Wear in Cryogenic Machining: The effect of liquid nitrogen and carbon dioxide, Journal of Manufacturing and Materials Processing, 2(2)31 p.1-12. https://doi.org/10.3390/jmmp2020031

Duman, E., Kaynak, Y., ( 2018) 15-5 PH çelik malzemesinin kriyojenik talaşlı imalat sürecinde yüzey bütünlüğü analizi, Makina Tasarım ve İmalat Dergisi (MATIM), 15(1), 19-26. Ulusal Dergi, http://dergipark.gov.tr/download/article-file/464518

Gharibi, A., Kaynak, Y. (2018) The influence of depth of cut on cryogenic machining performance of hardened steel,  Journal of the Faculty of Engineering and Architecture of Gazi University,DOI: doi.or./10.17341/gazimmfd.416423 file:///C:/Users/YK/Downloads/5000211667-5000484432-4-PB%20(1).pdf

Kaynak, Y., Gharibi, A., Ozkutuk, M., (2018) Experimental and numerical study of chip formation in orthogonal cutting of Ti-5553 alloy: The influence of Cryogenic, MQL, and High Pressure Coolant Supply, The International Journal of Advanced Manufacturing Technology.  https://link.springer.com/article/10.1007/s00170-017-0904-y

 Kaynak, Y., Huang, B., Karaca, H.E., Jawahir, I.S. (2017) Surface Characteristics of Machined NiTi Shape Memory Alloy: The effects of cryogenic cooling and preheating conditions, Journal of Materials Engineering and Performance, 26(7), 3597-3606.   https://link.springer.com/article/10.1007%2Fs11665-017-2791-7

 Xia, T., Kaynak, Y., Arvin, C. & Jawahir, I. S. (2016). Cryogenic cooling-induced process performance and surface integrity in drilling CFRP composite material. International Journal of Advanced Manufacturing Technology. 1(82),  605-616. https://link.springer.com/article/10.1007/s00170-015-7284-y

Perçin, M., Aslantas, K., Ucun, İ., Kaynak, Y., Çicek, A. (2016) Micro-drilling of Ti–6Al–4V alloy: The effects of cooling/lubricating.  Precision Engineering, 45, 450-462.

Kaynak, Y., Robertson, S. W., Karaca, H. E. & Jawahir, I. S. (2015). Progressive tool-wear in machining of room-temperature austenitic NiTi alloys: The influence of cooling/lubricating, melting, and heat treatment conditions. Journal of Materials Processing Technology. Sayı -. Cilt 215 sf 95–104

Kaynak, Y., Karaca, H., Noebe, R. & Jawahir, I. S. (2015). The effect of active phase of the work material on machining performance of a NiTi shape memory alloy. Metallurgical and Materials Transactions A. Sayı 6. Cilt 46 sf 2625-2636

Kaynak, Y., Manchiraju, S. & Jawahir, I. S. (2015). Modeling and simulation of machining-Induced phase transformation of NiTi Alloy. Procedia CIRP. Sayı -. Cilt 31 sf 557-562

Huang, B., Kaynak, Y., Sun, Y. & Jawahir, I. S. (2015). Surface Layer Modification by Cryogenic Burnishing of Al 7050-T7451 Alloy and Validation with FEM-based Burnishing Model. Procedia CIRP. Sayı -. Cilt 31 sf 1-6

Kaynak, Y., Tobe, H., Noebe, R. D., Karaca, H. & Jawahir, I. S. (2014). The effect of machining on microstructure and transformation behavior of NiTi alloy. Scripta Materialia. Sayı -. Cilt 74 sf 60-63

Kaynak, Y., Lu, T. & Jawahir, I. S. (2014). Cryogenic machining-induced surface integrity:A review and comparison with dry , MQL, and Flood-cooled machining. Machining Science and Technology: An International Journal. Sayı 18. Cilt 2 sf 149-198

Kaynak, Y. (2014). Evaluation of machining performance in cryogenic machining of Inconel 718 and comparison of machining performance with dry and MQL machining. İnternational Journal of Advanced Manufacturing Technology. Sayı 5-8. Cilt 72 sf 919-933

Kaynak, Y. (2014). Machining and Phase Transformation response of room-temperature austenitic NiTi shape memory alloy. Journal of Materials Engineering and Performance. Sayı 9. Cilt 23 sf 3354-3360

Kaynak, Y., Karaca, H. & Jawahir, I. S. (2014). Surface integrity characteristics of NiTi shape memory alloys resulting from dry and cryogenic machining. Procedia CIRP. Sayı -. Cilt 13 sf 393–398

Kaynak, Y., Karaca, H. & Jawahir, I. S. (2014). Cutting Speed Dependent Microstructure and Transformation Behavior of NiTi Alloy in Dry and Cryogenic Machining. Journal of Materials Engineering and Performance. Sayı 1. Cilt 24 sf 452-460

Jawahir, I. S., Kaynak, Y. & Lu, T. (2014). The Impact of Novel Material Processing Methods on Component Quality, Life and Performance. Procedia CIRP. Sayı -. Cilt 22 sf 33-44(Keynote Paper)

Kaynak, Y., Karaca, H., Noebe, R. D. & Jawahir, I. S. (2013). Tool-wear analysis in cryogenic machining of NiTi shape memory alloys: A comparison of tool-wear performance with dry, and MQL machining. Wear. Sayı 1-2. Cilt 306 sf 51-63

Kaynak, Y., Karaca, H., Noebe, R. D. & Jawahir, I. S. (2013). Analysis of Tool-wear and Cutting Force Components in Dry, Preheated and Cryogenic Machining of NiTi Shape Memory Alloys. Procedia CIRP. Sayı -. Cilt 8 sf 498–503

 

2013 Öncesi

Huang, A., Kaynak, Y., Umbrello, D. & Jawahir, I. S. (2012). Cryogenic Machining of Hard-to-machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining. Advanced Materials Research. Sayı -. Cilt 500 sf 140-145 

Kurt, M., Kaynak, Y., Kamber, O., Mutlu, B., Bakir, B. & Koklu, U. (2010). Influence of molding conditions on the shrinkage and roundness of injection molded parts. International Journal of Advance Manufacturing technology. Sayı 5-8. Cilt 46 sf 571-578

Kurt, M., Kaynak, Y., Bagci, E., Demirer, H. & Kurt, M. (2009). Dimensional analyses and surface quality of the laser cutting process for engineering plastics. International Journal of Advance Manufacturing technology. Sayı 3-4. Cilt 41 sf 259-267

Kurt, M., Kamber, O., Kaynak, Y., Atakok, G. & Girit, O. (2009). Experimental investigation of plastic injection molding: Assessment of the effects of cavity pressure and mold temperature on the quality of the final products. Materials& Design. Sayı 8. Cilt 30 sf 3217-3224

Ozmen, D., Kurt, M., Ekici, B. & Kaynak, Y. (2009). Static, dynamic and fatigue analysis of a semi-automaticgun locking block. Engineering failure analysis. Sayı 7. Cilt 16 sf 2235-2244

Kurt, M., Bagci, E. & Kaynak, Y. (2009). Application of Taguchi methods in the optimization of cutting parameters for surface finish and hole diameter accuracy in dry drilling processes. The International Journal of Advanced Manufacturing Technology. Sayı 5-6. Cilt 40 sf 458-469

Kurt, M., Kaynak, Y. & Bagci, E. (2008). Evaluation of drilled hole quality in Al 2024 alloy. International Journal of Advance Manufacturing technology. Sayı 11-12. Cilt 37 sf 1051-1060


 

Uluslararası Konferanslarda Sunulan Bildiriler

Kıtay, Ö., Bozkurt, Ç.A., Kaynak, Y. ( 2018) Farklı Soğutucuların Inconel 718 Alaşımının İşlenebilme Performansına ETkisinin Araştırılması, UTIS 2018.

Demirtaş, E., Kırmacıoğlu, E., Altay, Ç., Gizem. Ş., Kaynak, Y. (2018) Martenzit Paslanmaz Çelik Malzemesinin Kriyojenik Koşullarda Kesilmesi Sürecinin Deneysel İncelenmesi, UTIS 2018.

Tascioğlu, E., Özkütük, M., Kaynak, Y. (2018) Ti-5553 Alaşım malzemesinin Talaşlı İşlenmesinin Sonlu Elemanlar Yöntemiyle Modellenmesi ve Deneysel Doğrulama, UTIS 2018. 

Kıtay, Ö., Taşcıoğlu, E., Kaş, M., Nesli Ş., Kaynak, Y., Yılmaz, O. ( 2018) Seçici Lazerle Ergitme Yöntemi İle Üretilen Inconel 625 Alaşımlı Parçada Yüzey Bütünlüğünün İncelenmesi, UMTIK 2018 

Kıtay, Ö., Kaynak, Y. (2018) Şekil Hafızalı NiTi Alaşımın Kuru, MQL ve Kriyojenik Koşullarda İşlenmesinde Kesici Takım Aşınmasıyla İş Parçası Yüzey Kalitesi Arasındaki İlişkinin Araştırılması, UMTIK 2018 

Çiçek, S., İlbay, K., Taşcıoğlu, E., Kaynak, Y. (2018) Pirinç malzemelerin delinmesi sürecinde kesici takım yuvarlanma yarıçapının iş parçası yüzey bütünlüğüne etkisi, UMTIK 2018 

Kaynak, Y., Gharibi, A. (2017) The Effects of Cutting Parameters on Machining Performance of Titanium Alloy Ti-5553, Advances in Materials Processing & Technology ( AMPT), Chennai, India, 2017.

Kıtay, Ö., Kırmacıoğlu, K.E., Kaynak, Y. (2017) P20 Takım Çeliğinin Karbondioksit Yardımlı Talaşlı İmalat Performansının Değerlendirilmesi, 8th International Symposium on Machining, Antalya, Turkey.

Uçurum, M., Bayram, H., Taşcıoğlu, E., Kaynak, Y. (2017) Eklemeli İmalat Yöntemiyle Üretilen 316L Paslanmaz Çelik Malzemesinin Talaşlı İmalat Sürecinin Araştırılması, 8th International Advanced Technologies Symposium, Elazığ, Turkey.

Dengiz, M., Sarıçan, Ö., Kıtay, Ö., Taşcıoğlu, E., Kaynak, Y. (2017) 316LVM Paslanmaz Çelik Malzemesinin Talaşlı İmalat Ve Yüzey Bütünlüğü Analizi, 8th International Advanced Technologies Symposium, Elazığ, Turkey. 

Ozkutuk, M., Kaynak, Y. (2017) The effect of material parameters on chip formation in orthogonal cutting simulation of Ti-5553 Alloy, 16th CIRP Conference on Modeling of Machining Operations, Cluny, France.

Duman, E., Kaynak, Y. (2017) Havacılık ve Savunma Sanayinde Kullanılan Paslanmaz Çelik Malzemelerin Talaşlı İmalat Sürecinde Yüzey Bütünlüğü Analizi, II. Uluslararası Savunma Sanayi Sempozyumu, Kırıkkale, Türkiye

Gharibi, A., Kaynak Y. (2016) The Influence Of Liquid Nitrogen And Carbon Dioxide Cryogenic Coolants On Machining Performance Of Hardened Steel, 7th International Symposium on Machining, November 3-5, 2016, İstanbul, Turkey

Tascioglu, E., Kaynak, Y. (2016) Kurşunsuz Pirinç Malzemelerin Talaşlı İmalat Performansının Araştırılması,7th International Symposium on Machining, November 3-5, 2016, İstanbul, Turkey

Duman, E., Kaynak, Y. (2016) 316L Paslanmaz Çelik Malzemelerin Kriyojenik Talaşlı İmalat Sürecinde Yüzey Bütünlüğü Analizi, 7th International Symposium on Machining, November 3-5, 2016, İstanbul, Turkey

Kaynak Y., Gharibi, A.(2016) Progressive Tool Wear in Cryogenic Machining, HSM2016, XIII th International Conference on High Speed Machining, Metz, France.

Gharibi, A., Kaynak Y. (2016) Tool Wear and Surface Quality in Machining Process of Stainless Steel: The Effects of Various Coolant Supply Pressures, HSM2016, XIII th International Conference on High Speed Machining, Metz, France.

Gharibi, A. Duman, E., Ozkutuk, M., Kaynak, Y. (2016) The effects of liquid nitrogen and carbon dioxide cryogenic coolants on progressive tool wear, 17th UMTIK Conference, Turkey, 2016.

Gharibi, A., Kaynak, Y. (2016) The effects of High-Pressure coolant on progressive tool wear in machining stainless steel, 17th UMTIK Conference, Turkey, 2016.

Ucun, I., Kaynak, Y., Aslantas, K., Percin, M. (2016) Investigation of the effects of various cooling and lubricating techniques in micro milling process of NiTi shape memory alloy, 17th UMTIK Conference, Turkey, 2016.

 Kaynak, Y. (2015). Sustainable Technologies for processing of metallic material (Invited Speech) Sustainable Technologies of Metallic Materials. Maribor, Slovenya

Kaynak, Y. (2015). Cryogenic cooling-induced machining performance of AISI 1045 steel IISS’15. Karabuk, Turkiye

Köklü, U., Kaynak, Y., Demir, O., Avcı, A. & Etyemez, A. (2015). Fonksiyonel derecelendirilmiş kompozit malzemelerin talaşlı işlenebilme performansı 6. Ulusal Talaşlı İmalat Sempozyumu. İstanbul, Türkiye

 Kaynak, Y., Karaca, H. E. & Jawahir, I. S. (2014). Surface integrity characteristics of NiTi shape memory alloys resulting from dry and cryogenic machining 2nd CIRP Conference on Surface integrity (CSI). Nottingham, United Kingdom

Huang, B., Kaynak, Y., Arvin, C. & Jawahir, I. S. (2014). Improved surface integrity from cryogenic machining of Al 7050-T7451 alloy with ultra-fine grained structure 17th International Conference on Advances in Materials and Processing Technologies (AMPT 2014). Dubai, United Arab Emirates

Jawahir, I. S., Kaynak, Y., Lu, T. & Huang, B. (2014). Sustainable machining: developing predictive performance models and optimization techniques for improved product/process performanc 17th International Conference on Advances in Materials and Processing Technologies (AMPT 2014). Dubai, United Arab Emirates (Keynote Presentation)

Jawahir, I. S., Kaynak, Y. & Lu, T. (2014). The impact of novel material processing methods on component quality, life and performance the 3rd International Conference in Through-life Engineering Services. United Kingdom, United Kingdom (Keynote Paper)

Kaynak, Y., Karaca, H. E. & Jawahir, I. S. (2014). Cryogenic and dry machining of NiTi shape memory alloys SMST 2014. USA, USA

Turabi, A. S., Li, P., Kaynak, Y., Karaca, H. E. & Jawahir, I. S. (2014). Shape memory materials for sustainable future 4th International Forum on Sustainable Manufacturing. Lexington, USA

 

2013 Öncesi

  

Kaynak, Y., Karaca, H. E., Noebe, R. D. & Jawahir, I. (2013). Analysis of Tool-wear and Cutting Force Components in Dry, Preheated, and Cryogenic Machining of NiTi Shape Memory Alloys 14th CIRP Conference on Modelling of Machining Operations (CIRP CMMO 2013). Turin, Italy

Jawahir, I. S., Pu, Z., Yang, S., Rotella, G., Kaynak, Y., Lu, T., Deshpande, A., Umbrello, D. & Dillon, O. (2012). Cryogenic Processing of Materials for Enhanced Product Life, Performance and Sustainability 15th International Conference on Advances in Materials and Processing Technologies (AMPT 2012). Wollongong, Australia (Keynote Paper)

 Huang, A., Kaynak, Y., Umbrello, D. & Jawahir, I. S. (2012). Cryogenic Machining of Hard-to-machine Material, AISI 52100: A Study of Chip Morphology and Comparison with Dry Machining Proceedings of the 10th Asia-Pacific Conference on Materials Processing (APCMP 2012). Jinan, China

Kaynak, Y., Karaca, H. & Jawahir, I. (2011). Cryogenic machining of NiTi shape memory alloys , 6th Int. Conference and Exhibition on Design and Production of Machines and Die/Molds Conference. Ankara, Turkey

Kaynak, Y., Karaca, H. & Jawahir, I. S. (2010). Sustainability evaluation in machining of NiTi shape memory alloys , 1 st International Conference on Sustainable Life in Manufacturing (SLIM 2010), 24-25 June,. Isparta, Turkey

Lu, T., Kaynak, Y., Stovall, C., Pusavec, F., Caruso, S., Jayal, A., Dillon, O. & Jawahir, I. S. (2010). Cryogenic machining of aerospace and automotive alloys for improved surface integrity TFISE Showcase. Lexington, USA

 Kurt, M., Kaynak, Y., Bakir, B., Atakok, G. & Koklu, U. (2009). Al 2024 Aluminyumun Elmas benzeri karbon (DLC) kaplanmis matkaplarla delinmesinde kesme parametrelerinin deneysel incelenmesi ve Taguchi optimizasyonu Uluslararası İleri Teknolojiler Sempozyumu. Karabuk, Turkiye

Akay, A., Kaynak, Y., Bagci, E., Kirbas, C., Kurt, M. & Girit, O. (2008). AISI 1040 çeliğinin frezelenmesinde yüzey kalitesinin kesici takım gürültüsünün analizi ile belirlenmesi Uluslararasi Malzeme Sempozyumu. Denizli, Turkiye

Kaynak, Y., Kurt, M., Atakok, G. & Koklu, U. (2008). plastik kalıp çeliğinin tel erozyon tezgahında işleme parametrelerinin belirlenmesi ve boyutsal hata analizi Uluslararasi Malzeme Sempozyumu. Denizli, Turkiye

Kurt, M., Kaynak, Y., Atakok, G. & Koklu, U. (2008). Delik delme prosesinde kesme parametreleri ve iş parçası mekanik özelliklerinin çapak oluşumuna etkisinin araştırılması Uluslararasi Malzeme Sempozyumu. Denizli, Turkiye

Atakok, G., Kurt, M., Kaynak, Y. & Koklu, U. (2008). Soğuk iş takım çeliklerinin tornalanmasında geleneksel ve silici kesici uçların performans analizi Uluslararasi Malzeme Sempozyumu. Denizli, Turkiye

Kaynak, Y. & Yayla, Y. (2005). Cevre icin tasarim Uluslararasi ileri teknolojiler sempozyumu. Konya, Turkiye

Contact

Marmara University, Department of Mechanical Engineering, Advanced Manufacturing Technologies Laboratory (E-4), Faculty of Technology, Goztepe Campus, 34722 Kadikoy- ISTANBUL, TURKEY
 Phone: 0216 336 5770/1427  e-mail: yusuf.kaynak@marmara.edu.tr

Ziyaretçi Sayacı

23414
Bugün21
Dün87
Bu Hafta222
Bu Ay603